{"id":2463,"date":"2015-10-17T06:03:18","date_gmt":"2015-10-17T06:03:18","guid":{"rendered":"http:\/\/www.karuniaimmanuel.com\/?post_type=product&p=2463"},"modified":"2020-09-24T04:20:38","modified_gmt":"2020-09-24T04:20:38","slug":"toshiba","status":"publish","type":"product","link":"http:\/\/karuniaimmanuel.id\/?product=toshiba","title":{"rendered":"TOSHIBA"},"content":{"rendered":"

\"\"<\/a><\/p>\n

Toshiba VF-nC1 Nano – 2.2kW 230V 1ph to 3ph – AC Inverter Drive Speed Controller<\/h1>\n
\n
\n
\n

This product is no longer in production. For a\u00a0possible replacement see linked products below.<\/p>\n

Toshiba Tosvert VFnC1 Inverter for 2.2kW (3HP) 230V 3 Ph motor in VxF control to 10A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.<\/p>\n

Size – 117mm Wide x 155mm Deep x 142mm high in IP20 case.<\/p>\n

Overload – 150% x 60seconds.
\nSpeed Control Range – 0\/200Hz.
\nBraking – none.<\/p>\n

Features – Front Mounted Potentiometer, 1 x Analogue Input, 1 x Analogue Output, 4 Digital Inputs, 1 Relay Contact set.
\nProgrammable from built-in keypad.
\nEMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).<\/p>\n

Input Current – Not Specified (30A circuit breaker).
\nInput Voltage – 200\/240V single phase +-10% at 50\/60Hz.<\/p>\n

Wall mount in clean environment or cubicle mount.
\nRated at 40C Ambient.
\nVentilation space above and below – 50mm.
\nVentilation space at sides – 50mm.
\nHeat Loss at max output – 126W.
\nMounting onto screw fixings for rear mounting.<\/p>\n

Full part number is – VFNC1S-2022PL-W<\/p>\n

Download the Toshiba VFNc1 Manual from the link below:-<\/p>\n<\/div>\n